Anil Jain Refex

Refex Energy is one of the leading sustainable energy solutions provider in India. Anil Jain is the CEO of Refex Energy. Refex strongly believes in the sun’s potential to significantly address the problems associated with power obtained from non-renewable sources of energy.

Anil Jain's Refex Energy Independence Day Celebration at REL 2015 - Images

Authorization from Commissioner of Customs (DRI) to Anil Jain Refrigerants
Anil Jain DRI authorization was obtained after thorough verification and inspection of all the goods imported from other nations. The production process is carried out following the stipulated rules and regulations with proper license to export them.

Anil Jain explained How to Arrest Refrigerant Gas Leaks in a Cylinder
Anil Jain, one of the successful manufacturers of refrigerants, says the ways to arrest refrigerant gas leaks in a cylinder. Do not miss to read this informative article and be a part of threat to the atmosphere.

How to Arrest Refrigerant Gas Leaks in Cans by Anil Jain
Do you want to know how to arrest refrigerant gas leaks in cans? Read the article which explains Anil Jain’s ways to arrest refrigerant leaks as he is an expertise in refrigerant domain for several years. Read the article of Anil Jain and become precautious and secure environment.

"How to Arrest Refrigerant Gas Leaks in an ISO Tank" by Anil Jain
Arresting refrigerant gas leaks in an ISO tank is very important as the outcome will be unimaginable. Mr. Anil Gain explains in a simple and understandable way how to arrest refrigerant gas leaks in an ISO tanks. This article would definitely be informative and effective.

Arrest of Electric Shock in Solar Panels by Anil Jain
Many are unaware of the shocks that happen in solar panels; Mr. Anil Jain helps us how to arrest electric shocks in solar panels by being cautious in handling them. This explains the experience of Anil Jain in preventing the common accidents that occur in solar panels.

Anil Jain Refex Refrigerant – Superior Quality And Resilient
Anil Jain Refex Refrigerant Industries is one of the leading distributors of refrigerant gases all over India. The main goal of the company is to manufacture eco-friendly gases replacing the most dreadful agents such as chlorofluro carbons (CFCs). The products of the company are mainly used as foam blowing agents, refrigerants and aerosol propellants. Refex Refrigerants shows utmost dedication in retaining their reputation with respect to safety and health of the society and environment. Their prime motive is attaining success without sparing the safety factor of the surrounding atmosphere.

Arresting refrigerant gas leaks in an ISO tank is very important as the outcome will be unimaginable. Mr. Anil Gain explains in a simple and understandable way how to arrest refrigerant gas leaks in an ISO tanks. This article would definitely be informative and effective.

Mr. T Anil Jain (CEO Refex Energy)

Generally, ISO Tanks are developed based on the regulations of international codes for transporting large volumes of liquids via land or water. Some ISO tanks are equipped with refrigerants to carry products requiring temperature control. Such containers are highly dangerous as they may carry non-hazardous as well as hazardous substances. Even a small blunder can lead to great disaster! One of the reasons that can lead to destruction is the leakage of refrigerant gases from ISO tanks. If the leakage problem is not detected at the initial stage, the effect of damage is unimaginable. Mr. Anil Jain, CEO of Refex Industries Limited, has given valuable precautionary steps to detect and arrest refrigerant gas leaks.

Anil Jain Refrigerant Leakage Detection – Simple Ways

Here are some of the checklists suggested by Anil Jain to identify leakage of refrigerant gas from ISO tanks:

• It is necessary to ‘check the physical condition of tank’ for any damage caused during transportation or improper handling.
• It is very important to ‘check whether the safety valve has been closed and sealed properly’.
• Ensure to ‘compare the operating pressure with tank pressure’ indicated on the tank. If your tank pressure is found to be low, there is possibility for gas leakage.
• For safer side, it is always good to ‘weigh the tank’ before transporting. Reduction in the quantity of refrigerant reduces the tank weight. Immediately, follow the instructions of Anil Jain arrest ways and prevent damage.
• If you suspect any area for leak, just ‘pour soap water’ on the suspected area and check for bubble formation. No bubbles, no leaks!

Anil Jain Gases Leakage - Arresting Measures

Here are some of the ways suggested by Anil Jain to arrest refrigerant gas leakage:

• Immediately close the valve tightly once the leak is identified.
• Carefully discharge the entire refrigerant into a new tank through appropriate pumps as recommended by the technician or manufacturer.
• If possible, condense the remaining vapour so as to empty the tank.
• Finally, the most important point to follow is that all the above mentioned activities should be performed only by qualified technicians.

Anil Jain ISO Tank Leakage - Precautionary Measures

Here are some of the precautionary measures to follow before loading the refrigerants in ISO containers:

• First, check whether the ISO tank is suitable for filing that particular refrigerant because different refrigerants have varying chemical, physical and technical properties and do not suit all types of tank. Hence, it is necessary to choose the right refrigerant for the right tank or make suitable modifications in the tank.
• The approval of tank by the license issuing authority must be done before the expiry date. Make sure the vessel is inspected thoroughly and certified by the authorities.

The Indian intelligence agency, Directorate of Revenue Intelligence (DRI) is run by government officers working for Central Excise and Customs. DRI establishes broad intelligence gathering relying chiefly on individual intelligence sources and intelligence gathering equipment. It was awarded the most prestigious ‘ECA Ozone Protection Award for Customs & Enforcement Officers (3rd Edition)’ by the UN Environment Programme (UNEP) for its contribution to impose the trade provisions relevant to ozone-depleting materials under the Montreal Protocol. The Protocol launches targets and plans for well-developed and developing nations’ international treaties in phasing out and ultimately eliminating production, application and emissions of gases (bromine and chlorine) accountable for ozone layer depletion. The gas list also includes all HCFCs and CFCs used as refrigerants.

Refex Industries Limited (RIL) aims at refilling and distributing refrigerant gases, particularly eco acceptable gases in replacement for CFCs, all over India. These gases are primarily used as refrigerants, aerosol propellants and foam blowing agents. Anil Jain imports and exports huge quantities of refrigerant gases from and to other countries. DRI has thoroughly tested Anil Jain refrigerants and certified complete safety to his customers. Anil Jain DRI testing of products gave positive approval for all Refex Industries samples. The testing process was done in the factory and was certified that the samples R142b, R134a are developed as per the norms.

Anil Jain DRI authorization was obtained after thorough verification and inspection of all the goods imported from other nations. The production process is carried out following the stipulated rules and regulations with proper license to export them. Moreover Refex Industries Limited has DRI authorisation to buy refrigerant gases from other department. The permission letter was issued by the Ministry of Finance & Commissioner of Customs. Anil Jain Refex Industries Limited makes sure that environmental damage in the form of ozone depletion never happens by their products.

It is the responsibility of manufacturers to create products that are eco-friendly and less destructive. For more information about Anil Jain Refex Industries Limited, kindly visit http://www.refex.co.in or http://www.taniljain.com

Anil Jain Refex Refrigerant Industries is one of the leading distributors of refrigerant gases all over India. The main goal of the company is to manufacture eco-friendly gases replacing the most dreadful agents such as chlorofluro carbons (CFCs). The products of the company are mainly used as foam blowing agents, refrigerants and aerosol propellants. Refex Refrigerants shows utmost dedication in retaining their reputation with respect to safety and health of the society and environment. Their prime motive is attaining success without sparing the safety factor of the surrounding atmosphere.

The industry is headed by Anil Jain, respectable and successful manufacturer of refrigerant gases. The quality of the products can be valued from the years of experience he has dedicated himself for the growth of the company. He has been thriving hard for about 9 years to overcome the problems encountered by refrigerant gases. Anil Jain takes priceless efforts in educating the public about the hazards of refrigerant gases and their effects upon ozone layer. His intention is to avoid accidents of refrigerant gases that may happen due to carelessness and mishandling of refrigerant cans and cylinders. Anil Jain’s knowledge is not restricted to refrigerants domain, it extends even to the field of solar power generation.

Each of Refex customers are provided with an analysis certificate that confirms the standard and quality of their products. They take complete care in ensuring the safety of customer while refilling the gases. The refilled products are tested and certified before and after completion of the process in highly advanced laboratory. RIL has received the ISO 9001-2000 certification from TUV-SUD, Germany. Anil Jain Refex Refrigerant Industry is equipped with cutting-edge and highly advanced technological devices that meet the standard of quality and safety of products. Refex team is the only reason for the success and popularity of the products. Each employee of Refex is a gift to the company who work passionately to reach the goals.

The goals of Anil Jain Refex Refrigerant Industries are not constrained to just quality of products; they go beyond boundaries in meeting the competitive edge and expectations of clients. They tend to serve both their clients and society with proper balance of quality and safety. Three main reasons for the success and growth of the company include professionalism in work process, commitment to work and loyalty to people.

Anil Jain, one of the successful manufacturers of refrigerants, says the ways to arrest refrigerant gas leaks in a cylinder. Do not miss to read this informative article and be a part of threat to the atmosphere.

Everyone is aware of the fact that refrigerants are nothing but substances capable of converting easily from liquid to gaseous state. Hence, their application has increased day-by-day in several domains, despite the high risk factors associated with their usage. Usually, refrigerants are stored in disposable cylinders for application in air conditioners and refrigerators. Such kind of cylinders must be handled with care and it is mandatory to be aware of the hazards occurring due to leakage of refrigerant gases. Anil Jain, Refex Industries Limited CEO guides us with few effective ways to prevent such kind of accidents.

Anil Jain ‘Arrest of Gas Leaks’ in Cylinders – Simple and Effective Methods

Step 1 – Locate the Leak
The best and most definite way to identify exactly where the refrigerant leak has occurred is to use a gas leak detector. This type of detector will specifically detect the leak from a refrigerant coolant. You can easily locate the exact leak area if you monitor the cylinder by a detector. The detector alerts the user by providing audio-visual signal. In addition, you can apply soap oil on the spot to ascertain the leak. Once the leak spot is identified, you must rectify it immediately.

Step 2 – Remove the Refrigerant
Before beginning to repair the unit, you need to remove the entire refrigerant from the cylinder. To do this, you must connect a refrigerant pump to the cylinder and empty the refrigerant coolant completely. Pump usage and connections may vary slightly depending on the manufacturer. Hence, be certain to read the manufacturer’s instruction manual thoroughly before using the pump. Finally, you must condense the leftover vapour and make it danger-free.

Step 3 – Fix the Leak
If the leak is found in the valve, firstly you must clean the valve thoroughly and perform hydro testing. Once done, make sure it is properly attached to the cylinder. After rectifying the value, retest the cylinder with a gas detector. If you still sense the leakage, you must replace the valve for sure, that is, removing the existing valve and attaching a new one in its place.

Anil Jain Gases Leak – Precautionary Actions

• Please go through the product label and safety data sheet.
• Make sure there is enough ventilation.
• Do not expose refrigerant cylinders to sparks, flames or hot objects.
• While handling refrigerants, it is good to wear impervious gloves, safety glasses and other protective device.
• In case of contact with eyes or skin, wash immediately with water and seek medical attention.
• If any chemical spills on the cylinder, immediately clear the surrounding.
• Never hit or drop the cylinder with any other object.
• Do not lift the cylinder holding the valve.
• Never leave an empty cylinder open because moisture in the atmosphere may enter.
• Never apply direct flame or live steam to the cylinder.
• Keep kids away from the usage area.

Do you want to know how to arrest refrigerant gas leaks in cans? Read the article which explains Anil Jain’s ways to arrest refrigerant leaks as he is an expertise in refrigerant domain for several years. Read the article of Anil Jain and become precautious and secure environment.

Refex Refrigerant Gas

Refrigerant gases are threat to the society, if mishandled wrongly. For the past 5 to 6 decades, Chlorofluorocarbons (CFCs) are being used as refrigerants to create air-conditioning and refrigerating effects. Recently, it was identified that CFCs are the most destructive element of the environment. It is regarded as the major causative for ozone layer depletion contributing to global warming (greenhouse effect).

At present large quantities of CFCs filled refrigerant cans are used in a number of air-conditioning and refrigerating systems. Although the movement of refrigerant happens in an enclosed cycle, leakages escape and affect the ozone layer. The most disgusting fact about the refrigerant gases is that they possess remarkably longer atmospheric life. This indicates that if CFCs are leaked in the environment, they may tend to deplete the ozone layer for the next 10 decades. Mr. Anil Jain, CEO of Refex Refrigerant Limited, works for ozone diplomacy in saving the society by suggesting refrigerant leak arresting techniques.

Anil Jain Gases Leak Detection Techniques

• Any type of methods can be undertaken for both initial test and follow-up verification to cope strong professional judgment. The leak has to be identified and fixed as soon as possible to prevent environmental damage. Some of the simple tests to detect refrigerant leaks include:
• A soap bubble test: If you suspect gas leakage, just pour soap solution on the unit. If bubbles are formed, the leakage is confirmed and necessary steps can be implemented to overcome the problem.
• Electronic leak detectors: An electronic leak detector is a device that produces audio-visual signals when brought near the leakage area. Before the leak spreads all over, the refrigerant gas must be emptied at the easiest.
• Ultrasonic leak detectors: An ultrasonic leak detector is a user-friendly, superior quality, sensitive device helping to detect air leaks through ultrasound. Such type of detector helps to identify the location of leak more precisely.
• A pressure test: It involves filling the container with air and monitoring the increase or decrease in pressure for a specified time period. If pressure decreases, it denotes the presence of leak. Any cracks, split seams, holes, porosity or other conditions causing leaks can be detected by this method.
• Other methods to detect include a vacuum test or fluorescent dye and black light test, an infrared test, and a near infrared (back scatter absorption gas imaging) test.

Anil Jain Arrest Measures: Simple and Mandatory

1. Ensure that refrigerant cans are in good condition with caps to seal.
2. Make sure that the caps fit properly to the can. If the cap seems to be loose fitting, immediately change the can at the earliest.
3. Always store in a place specified by the manufacturer. Temperature places a major role in causing leakage of gas. If the can is to be stored in cool places, it must never be kept in place where the sunlight falls directly.
4. Do not beat or drop the can at any cost.
5. If the handling process involves technical advice, seek for it rather than experimenting.

Source: How to Arrest Refrigerant Gas Leaks in Cans by Anil Jain

Many are unaware of the shocks that happen in solar panels; Mr. Anil Jain helps us how to arrest electric shocks in solar panels by being cautious in handling them. This explains the experience of Anil Jain in preventing the common accidents that occur in solar panels.



Around the globe, renewable energy is considered as the “Energy for Future” and particularly, the solar energy is contributing much in replacing fossil fuels. Sun is the chief source of energy and it is possible to convert sunlight directly into electricity with the help of solar panels. Nowadays, solar panels have become so reliable in saving the electricity bills to greater extent. With increase in usage of solar panels, manufacturers, contractors, traders, technicians, engineers and customers must collaborate in creating shock-free solar panels.

According to Anil Jain Refex Refrigerants Limited CEO, there are important safety measures that need to be adhered during the installation of solar panels. He assures that such safe installation methods prevent people from coming into contact with potentially lethal DC voltages. As a standard installation (safe) practice, one must run and terminate both ends of the solar DC cable between the array junction box and the DC Isolator first before starting to electrically connect the solar panels. This is followed by “plugging in” each panel to the string as well as to the PV extension lead, if used.

If two strings are being connected in parallel, ensure that no panels are plugged in until all DC terminations are complete. If necessary, tag the other array plugs outside. This will eliminate the chance of an electric shock occurring due to back-feed from the other string. Finally, it is mandatory to ensure that the PV cables are correctly restrained to prevent movement. Despite proper attention, accidents are prone to occur because certain important steps are frequently missed or skipped during the installation of PV systems.

Technicians must properly test all cables with appropriate tools before touching them. Not all volt-sticks work on DC current, and so a correct voltmeter must be used all the times. It is imperative that all tradesmen utilise and train technicians in applying the right isolation procedures. Technicians must also communicate effectively with the tradesman throughout the job process. They must remember that electric shock may tend to throw someone from roof leading to major injuries or at times death. Hence, it is always better to use appropriate ‘Fall Prevention Equipment’ to avoid extreme damage. Remember, your life is worth more than a solar panel!

Anil Jain Arrest of Solar Panels Shocks – Useful Recommendations

• Personnel protective equipment (PPE) to be worn by the technicians before carrying out the activity.
• ‘Risk Assessment Checklist’ must be completed by the technicians.
• The installation of module should be carried out by qualified and experienced technicians.
• All tools and equipment must be tested and certified periodically as per compliance.
• Make use of appropriate safety insulated equipment approved for electrical installation processes. All others must be omitted strictly.
• Avoid wearing metallic watchbands, earrings, finger rings or nose rings and other metallic gadgets while troubleshooting or installing photovoltaic systems.

General Recommendations to Avoid Accidents

• Never use mirrors to artificially direct sunlight on the module.
• Do not try to disassemble the module at any cost.
• Never place heavy objects on solar panels.
• Warn children and make them aware of the danger associated with solar panels.

To know more about Anil Jain Refex Refrigerant Limited, kindly visit www.refex.co.in or www.taniljain.com

Mr. T. Anil Jain is a Chairman and Managing Director of the Company Refex Industries Limited. Below find Mr. T Anil Jain & Refex Energy's Latest Videos.

Anil Jain's Refex Energy CSR Project at Old mahabalipuram Road, Thiruporur Government School
Anil Jain Refex Energy Worked on 1KW Rooftop on a Government Shcool which doesnt have Grid Power. Inaugurated by Local Leaders, Anil Jain and Team Refex at Old mahabalipuram Road, Thiruporur.


Anil Jain Refex Energy's 300KW Solar Power Plant at Lifecell, Chennai
Anil Jain Refex Energy's 300KW Solar Power Plant at Lifecell, Chennai. Inaugurated by Mrs.Aishwarya Rai Bachchan at Lifecell Plant, Kelambakkam, Chennai.

Anil Jain Refex Energy CEO at India's first Solar PPA under Jawaharlal Nehru National Solar Mission
Anil Jain Refex Energy CEO at India's first Solar PPA under Jawaharlal Nehru National Solar Mission. India's first Solar PPA under Jawaharlal Nehru National Solar Mission.

On July 30, 2015 Business Standard reported written a article about Mr. T Anil Jain, CEO Refex Energy in their website business-standard.com. Below find the article.

Shoppers Stop non-executive chairman invests in Chennai-based laundry startup Wassup
Company raised $2 million from HNIs and plans to raise another $10 million from VCs

Wassup, an on-demand laundry and dry-cleaning service, has raised $2 million (Rs 12.9 crore) from high networth individuals, including B S Nagesh, non-executive vice-chairman of Shoppers Stop, and former Barclays India chief executive Mani Subramanian, co-founder R Balachandar said. They have come in during pre-Series A fund-raising. The firm now plans to raise $10 million from venture capital funds.

Wassup's co-founder R Balachandar told Business Standard that other HNIs are T Anil Jain, chairman and managing director of Refex Industries Ltd, Ranga Iyer, former MD of pharma major Wyeth India and Arun Chandra Mohan and Praveen Sinha, founders of Jabongg.

Balachandar said the company is betting big on both online and offline mediums, while the Jabong founders can help the company on the technology front.

He added Wassup will be rolling out several initiatives in the coming months including tying up with apparel and fashion brands to offer after sales maintenance and others.

Wassup is now gearing up to raise another $10 million from VCs to support its three-year plan. The company is planning to expand to 25 cities from the current five cities, through organic and inorganic routes.

Each of the cities will have around 10 stores taking the total number of stores to 250-300 stores across the country from the current 30 stores across Bangalore, Delhi, Chennai, Cochin and Pune.

"The brand vision is to be in 100 cities in the next 3 years. Wassup has processed 34 million garments so far and this number is growing month on month," claimed Balachandar.

He added, the company has clocked Rs 5 crore in 2014-15 and set a target of Rs 20 crore.

The laundry market in India is estimated to be valued at Rs 2,00,000 crore annually out of which 95 per cent is unorganised.

Nagesh commented that: "Wassup can have impact on the people at the bottom of the pyramid in the laundry business c and this aspect is very close to my heart and is aligned to what we are trying to do. I like the energy of the founders and their value system. When the purpose of the business and the founders are aligned it becomes very easy for businesses to create value for its stakeholders. I am looking forward to my relationship with Bala, Durga and Wassup as an advisor and a mentor to the business."

Mr T. Anil Jain, CEO Refex Energy launched a new website Taniljain.com on August 1, 2015. Taniljain.com is a new and official website for Mr. T. Anil Jain, CEO Refex Energy.



Mr. T. Anil Jain is a Chairman and Managing Director of the Company Refex Industries Limited. Shri. T.Anil Jain, aged 38 years is a promoter and first Director of Refex Industries Limited. On August 1, 2015 Mr. T. Anil Jain launched a new website taniljain.com as a official website.

Taniljain.com website is a perfect place to know about Mr. T Anil Jain and Refex Energy. In that website they update Latest News, Blogs, Videos and Image Gallery about Mr. T. Anil Jain and refex energy.

Uttar Pradesh's Biggest Solar Power Plant 23MW Designed, Installed and Commissioned by Anil Jain's Refex Energy Limited. Inaugurated by Honourable Chief Minister of Uttar Pradesh Shri Akhilesh Yadav.

Anil Jain Refex Energy CEO at India's first Solar PPA under Jawaharlal Nehru National Solar Mission. India's first Solar PPA under Jawaharlal Nehru National Solar Mission. In the presence of Shri Farooq Abdullah, Shri Sushil Kumar Shinde and other Eminent Leaders and bureaucrats. Presented by Shri Deepak Gupta, Then Secretary MNRE.

Shri. T.Anil Jain, aged 38 years is a promoter and first Director of the Company Refex Energy. Anil Jain was appointed as Managing Director of the company Refex Energy on 13-09-2002 and has held the position since then. Below find the Latest News and Blogs about Mr. Anil Jain and Refex Energy.



Anil Jain's Refex Energy Ltd Commissions Two MW-Scale Projects In UP And AP
http://justpaste.it/m0eb

Anil Jain's Refex Energy Ltd has Commissioned 2 Solar PV Plant in Rajasthan and Telangana
http://aniljainrefex.skyrock.com/3253934192-Anil-Jain-s-Refex-Energy-Ltd-has-Commissioned-2-Solar-PV-Plant-in.html

Anil Jain Refex Energy Ltd has Successfully Commissioned a 10 MWP Solar Plant in Kolayat Region in Rajasthan
http://anil-jain-refex.wikia.com/wiki/Anil_Jain_Refex_Energy_Ltd_has_Successfully_Commissioned_a_10_MWP_Solar_Plant_in_Kolayat_Region_in_Rajasthan?venotify=created

Anil Jain Refex Energy said Setting up Solar Plants more Expensive in Tamil Nadu
http://groupspaces.com/AnilJainRefex/pages/anil-jain-refex-energy-said-setting-up-solar-plants-more-expensive-in-tamil-nadu

Aiswarya Rai at Anil Jain Refex Energy's 300KW Solar Power Plant at Lifecell - Image Gallery. 300Kw Solar Power Plant at Lifecell, Chennai Inaugurated by Mrs.Aishwarya Rai Bachchan at Lifecell Plant, Kelambakkam, Chennai.

Anil Jain Chairman and Managing Director of the company Refex Energy said Setting up solar plants more expensive in Tamil Nadu. Even as the Tamil Nadu government is trying hard to be seen as India's next solar destination, taxation rules are serving as a hurdle.



"The overall project costs go up, because about 95% of the cost of a solar plant is the equipment while construction cost is very low. And it is the equipment that is taxed. We have petitioned the government but to no avail," Anil Jain, managing director of Refex Energy , said.

Setting up a solar power plant in TN is about 8% more expensive than in other states since companies have to pay between 5% and 14.5% more as taxes while procuring solar equipment, and liaisoning costs are higher.

A company that wants to set up a 10MW solar plant in Tamil Nadu would have to shell out about `3 crore more as the state imposes value added tax (VAT) of 5% on equipment required for solar plants."Andhra Pradesh, Maharashtra and Punjab offer full VAT refund. Tamil Nadu's solar policy offers no such exemption," Dakshinamoorthy Arumugam, director of Marigold Steel and Power, said. 

Anil Jain's Refex Energy 1MW Captive Solar Power plant Will Generate 16.5-17Lakh units a year and save power bills of close to Rs.1.00 Crore a Year. This plant is running at 79.8% Plant Performance Ratio, one of the highest among Solar Power Plants across the country. Below watch Anil Jain's Refex Energy 1MW Captive Solar Power Plant Video.



Anil Jain's Refex Energy 1MW Captive Solar Power Plant Video Youtube



Anil Jain's Refex Energy 1MW Captive Solar Power Plant Video Dailymotion


Anil Jain's Refex Energy 1MW Captive Solar... by aniljainrefex

Anil Jain Refex Energy CEO at India's first Solar PPA under Jawaharlal Nehru National Solar Mission. India's first Solar PPA under Jawaharlal Nehru National Solar Mission. In the presence of Shri Farooq Abdullah, Shri Sushil Kumar Shinde and other Eminent Leaders and bureaucrats. Presented by Shri Deepak Gupta, Then Secretary MNRE.

Anil Jain's Refex Energy was set up in 2008 in Mumbai, India with a focus on developing Solar as sustainable energy alternative India. Anil Jain Refex Energy Limited has become a name to be reckoned with, in the Solar EPC Sector, in the last few years, primarily due to technically skilled and committed work force and quality of services.


Anil Jain's Refex Energy Ltd, one of India's leading Solar EPC companies in terms of cumulative EPC installations, has commissioned 2 solar PV plant aggregating to 18 MWp in the states of Rajasthan and Telangana. The Telangana project for Aditya Birla Group, one of India’s biggest IPP for Solar, is a 11 MWp deploying Poly-Silicon modules and Central Inverters. The second plant of capacity 7 MWp was constructed for Ghodawat Group in two parts, 4 MW in May and 3 MW in September. The plant marks Ghodawat Group’s first foray in the solar sector.

“In both the plants we have used tier – 1 equipments and deployed best engineering practices.” said Mr. Arun Mehta, CEO, Refex Energy Ltd. These solar plants takes the total commissioned tally for Refex to 80 MW spread across 6 different states. The company, aggressively building up market share in the Indian Solar EPC industry, has another 40MW expected to be commissioned by December 2014.

Anil Jain Refex Energy's 300KW Solar Power Plant at Lifecell, Chennai. Inaugurated by Mrs.Aishwarya Rai Bachchan at Lifecell Plant, Kelambakkam, Chennai.



Anil Jain Refex Energy's 300KW Solar Power Plant at Lifecell - Video (youtube.com)



Anil Jain Refex Energy's 300KW Solar Power Plant at Lifecell - Video (dailymotion.com)


Anil Jain Refex Energy's 300KW Solar Power... by aniljainrefex

Anil Jain Refex Energy Worked on 1KW Rooftop on a Government School which doesn't have Grid Power. Inaugurated by Local Leaders, Anil Jain and Team Refex at Old Mahabalipuram Road, Thiruporur.

Mr. Tarachand Anil Jain is Chairman, Managing Director & Executive Director at Refex Industries Ltd. and a Managing Director at Refex Energy Ltd.



He is on the Board of Directors at Refex Industries Ltd., Sherisha Technologies Pvt Ltd., Sherisha Technologies (S) Pte Ltd., Refex Wind Power Pvt Ltd., Refex Solar Power Pvt Ltd., Refex Hydro Power Pvt Ltd., and Quidel Software Pvt Ltd.

Anil Jain's Refex Energy Ltd., the country’s fourth largest EPC company in terms of market share, (Source: Bridge to India Solar Map 2014) has successfully commissioned a 10 MWp solar plant in Kolayat region in Rajasthan. The Solar PV project deploys Canadian Solar poly-crystalline modules and Schneider Central Inverter and is owned by Trimex Sands Pvt. Ltd, India's top specialty value chain provider for industrial minerals. The Mining - Minerals - Real Estate conglomerate is based out of Chennai and has recently forayed into the renewable energy sector. The plant was commissioned on 30th September 2014 enabling the Group to avail of full accelerated depreciation benefit.



Speaking during the event, Mr. Anil Jain, Managing Director, Refex Energy Ltd. said, “We are extremely happy on commissioning Trimex Group’s third Solar Project. We have also commissioned two other plants for Trimex Group’s captive requirement and are extremely happy to have been entrusted with the job for the third time.”

Mr. Pradeep Koneru, Managing Director, Trimex Sands Pvt. Ltd. spoke at length on the occasion, “Refex has been chosen by the Trimex Group as its preferred EPC partner. We have executed 2 projects with them and are happy with their capability and on-time execution of the projects. We look forward to partner with them in all our future Renewable endeavors and wish them all the luck and success.

Source: http://www.solarquarter.com/index.php/news/asia/india/item/406-refex-energy-ltd-has-successfully-commissioned-a-10-mwp-solar-plant-in-kolayat-region-in-rajasthan

Refex Energy Limited has commissioned 10 MWp Solar PV Power plant at Feroz Gandhi Unchahar Thermal Power Station of NTPC Ltd., on 31st March 2014. The project is located in Rae Bareli district of Uttar Pradesh.Refex Energy Limited has executed the project after securing the order from BHEL for complete engineering, procurement and construction work except the BHEL make solar modules and the plant fencing. The project deploys indigenous Central Inverters from Schneider. “We are very proud to be associated with industry stalwarts like NTPC and BHEL. The project reflects the efforts and commitments of NTPC, BHEL and Refex Energy Ltd. towards a greener future.” quoted Mr. Arun Mehta, Chief Executive Officer, Refex Energy Ltd.



Refex Energy Ltd. Has also installed 1 MW solar plant for Chennai based Trimex Sands Private Limited, on 29th March 2014. The plant is located at group’s manufacturing plant in Srikakulam district in Andhra Pradesh and was set up under REC mechanism for the captive consumption of Trimex’s mineral suppression plant in Srikakulam.Mr. Pradeep Koneru, Managing Director of Trimex Sands Private Limited, said, “This is our first step towards entering Renewable Energy and we wish to grow in this sector exponentially for our own captive and third party power sale. We appreciate the work done by Refex at out Srikakulam plant, their approach has been very professional and have complied to every need of our site engineers. Their timely completion of the project with a quick turnaround has helped us get Accelerated Depreciation benefit. We look forward to working with them in our future solar endeavors.

“Tier I modules from Renesola and SMA String inverters have been chosen to ensure maximum up time and higher generation. The plant will generate about 16.5 lac units per year, resulting in cost savings of close to INR 10 million annually in the electricity bills” observed Mr. Anil Jain, Managing Director, Refex Energy Ltd. Refex has also commissioned a 100 KW off-grid plant for Trimex for their plant’s lighting in Srikakulam. Refex Energy Limited is also developing another 10 MW solar plant for the Trimex Group in Rajasthan. The total installed capacity of Refex Energy Ltd. now tallies to 60 MW, with another 50 MW under different stages of completion.

Source: http://eqmaglive.com/EQ-ARTICLE-26382-Refex-Energy-Ltd--Commissions-two-MW-scale-projects-in-UP-and-AP.html#.VVHNUtKqqko

Chennai-based Refex Energy, a solar power plant builder, on Wednesday said it had completed constructing two solar photovoltaic projects of 11.5 MW capacity each, in Uttar Pradesh. Refex’s Managing Director, Anil Jain, has said in a press release that the two projects constitute the largest single-location solar plants in Uttar Pradesh. He said that Refex has so far built solar plants worth 115 MW in the country, and expects to do 100 MW more this year.

Shri. T. Anil Jain:-
Chairman and Managing Director


Shri. T.Anil Jain, aged 38 years is a promoter and first Director of the Company. He was appointed as Managing Director of the company on 13-09-2002 and has held the position since then. He holds 2105642 Equity shares in the Company.

Shri T Anil Jain, a commerce graduate, carries with himself more than 10 years experience in Air Conditioner Products and spares. He has been instrumental in formulating the company’s projects and marketing of its products. Shri T Anil Jain, is fully equipped with the latest technologies in the business segment of the company and is fully in charge of conceptualizing the company’s plans, evolving strategies for the same and implementing them. He is looking after globalization of Refex through various overseas mergers and acquisitions.

Over the years Shri. T. Anil Jain was mainly instrumental in navigating the company to the present position in the market after overcoming the business challenges, financial problems and other operational difficulties He has high degree of knowledge in both the business segments of the company, namely refilling of refrigerant gases as well as solar power generation.